No root disk controller was found for help I installed Scounix 5.06 xSeries 345 Type 8670 hit is how this mistake happened? Will my first contact with the help things. Two 73.6G SCSI hard disk Raid1 No root disk controller was found for help Very simple, the startup sequence can be adjusted BIOS Lane. No root disk controller was found for help Specific regulation ah fail to understand how it has SCSI and slot1 slot2 etc. Scsi Scounix not seem to recognize the hard drive No root disk controller was found for help I also installed in HP LH3 those mistakes, he is also hard disk array that is used specifically for the manufacturers The two documents generated AMIRD software, or the driver disk HP13.0.0 generated the envelope in boot:defbootstr link= "amird" Sdsk=amird (0,0,0,0) Srom=wd (0,0,0,0). After AMIRD packets then be able to suggest to load hard disk, I wonder if I can use this to you that the upswing No root disk controller was found for help I generated in accordance with its Document into a software package to find out later that Document it is the content of imported restart link= "ipsraid" Sdsk=ips (0,0,0,0) Srom=wd (0,0,0,0) No root disk controller was found for help A general Driver FOR UNIX to better generated by several software packages, you have to be convinced that the generation packet is a few floppy disks, and then generating it is boot:defbootstr Finally, you suggested that the issue seems to restart, and I wonder if this is not related to another parameter is not correct (0, 0, 0, 0) No root disk controller was found for help My machine is IBM X255 also found "no root disk. . . . . " Will prawn enlighten! ! ! No root disk controller was found for help The latest drive to the first, because the hard drive is 73G, coupled with RAID doing so, is there such a situation Then consider fighting orders BIOSGEOM= (**** **** ***) No root disk controller was found for help Sco finasteride hard disk can hold Unix? No root disk controller was found for help No root disk controller was found for help BIOS of the machine started to establish a sequence of SCSI hard disk adapter to receive the startup sequence as the application of RAID card or floppy disk and CD-ROM after the start of the third sequence of symbols in the boot suggested, the correct application of RAID card or SCSI input-driven packet, and then be installed. No root disk controller was found for help 345 on the card itself, with the Features of SCSI Card Driver LSI Http://www.sco.com/support/update/download/release.php?rid=41 Boot:defbootstr link=lisl No root disk controller was found for help --> Since the link ipsraid, Sdsk=ips (. . . ), The ips is where things? Defbootstr link= : "ipsraid" Sdsk=ipsraid (0,0,0,0) Srom=wd (0,0,0,0) This? [ Closed window ]