Haier trend !MRTG monitoring router CPU utilization and MEM wrong! Cpu-mem.cfg following documents : ### Global Configuration Options WorkDir : /var/www/html/cpu Refresh : 300 Interval : 5 ### CPU Utilization Target[xxxx-cpu] :. 1.3.6.1.4.1.311.1.1.3.1.1.33.9.0&.1.3.6.1.4.1.311.1.1.3.1.1.33.9.0:xxxxxxxx@xxxx AbsMax[xxxx-cpu] : 100 MaxBytes[xxxx-cpu] : 100 Title[xxxx-cpu] : CPU Utilization (average) PageTop[xxxx-cpu] : CPU Utilization Options[xxxx-cpu] : gauge, growright, nopercent, noo YLegend[xxxx-cpu] : CPU Utilization ShortLegend[xxxx-cpu] :% LegendI[xxxx-cpu]:&CPU Utilization (percentage) ### Free RAM Target[xxxx-mem] :. 1.3.6.1.4.1.311.1.1.3.1.1.1.1.0&.1.3.6.1.4.1.311.1.1.3.1.1.1.1.0:xxxxxxxx@xxxx AbsMax[xxxx-mem] : 900000000 MaxBytes[xxxx-mem] : 900000000 RAM : FREE Title[xxxx-mem] RAM : FREE PageTop[xxxx-mem] Options[xxxx-mem] : gauge, growright, nopercent, noo RAM : FREE YLegend[xxxx-mem] ShortLegend[xxxx-mem] : B LegendI[xxxx-mem]:&FREE RAM Mrtg cfg, the error message as follows : SNMP Error : Beijing SNMP response with error code NoSuchName error status : Index 1 (OID : 1.3.6.1.4.1.311.1.1.3.1.1.33.9.0) SNMPv1_Session (remote host : "xxxx" [xxxx].161) Community : "xxxx" Request ID : 687276513 PDU bufsize : 8000 bytes 2s timeout : 5 retries : Backoff : 1) At /xxxxxx/mrtg/bin/. . /lib/mrtg2/SNMP_util.pm Line 490 SNMPGET Problem for. 1.3.6.1.4.1.311.1.1.3.1.1.33.9.0. SysUptime sysName on 1.3.6.1.4.1.311.1.1.3.1.1.33.9.0 : : : : : : V4only xxxx@xxxx /xxxxxx//mrtg/bin/mrtg Line at 1846 SNMP Error : Beijing SNMP response with error code NoSuchName error status : Index 1 (OID : 1.3.6.1.4.1.311.1.1.3.1.1.1.1.0) SNMPv1_Session (remote host : "xxxx" [xxxx].161) Community : "xxxx" Request ID : 687276514 PDU bufsize : 8000 bytes 2s timeout : 5 retries : Backoff : 1) At /xxxxxx/mrtg/bin/. . /lib/mrtg2/SNMP_util.pm Line 490 SNMPGET Problem for. 1.3.6.1.4.1.311.1.1.3.1.1.1.1.0. SysUptime sysName on 1.3.6.1.4.1.311.1.1.3.1.1.1.1.0 : : : : : : V4only xxxx@xxxx /xxxxxx//mrtg/bin/mrtg Line at 1846 ERROR : Target[xxxx-cpu][_IN_] '$target->;[0]{$mode}' did not eval into defined data ERROR : Target[xxxx-cpu][_OUT_] '$target->;[0]{$mode}' did not eval into defined data ERROR : Target[xxxx-mem][_IN_] '$target->;[1]{$mode}' did not eval into defined data ERROR : Target[xxxx-mem][_OUT_] '$target->;[1]{$mode}' did not eval into defined data Haier trend !MRTG monitoring router CPU utilization and MEM wrong! Found that the problem is OID Brothers, engaging in the CPU and MEM equipment manufacturers must understand the Turin reservoir. Snmp协议 proceed or pursue mrtg [ Closed window ]