Our company was using the Optical Access : Telecom is allocated to the IP Gateway : 218.104.X.118 218.104.X.113 We used the 2621 XM
Intranet use is 192.168.0.0
F0/0 and telecommunications which linked
F0/1 and network linked
My allocation is as follows :
Int F0/0
Ip add 218.104.x.113
Senat outside IP
Exit
Int f0/1
Ip add 192.168.0.12
Senat inside ip
Exit
Ip route 0.0.0.0 0.0.0.0 218.104.x.118
End
But now network can PING通 218.104.X.113 PING nowhere 218.104.X.118
Everyone should ask how allocation
So urgent restoration zone Senat with access-list Can understand that point? Ip Senat pool xxxx Ip Senat inside source xxxx
Access-list first to set up a list of basic, such as : access-list 50 permit 192.168.0.0, then 50 int ip f0/0 * Senat inside source list here is your basic list of the 50 50 f0/0 your external network mouth * Finally you do ip Senat inside and out side ip Senat Upstairs that I have done : Interface FastEthernet0/0
Ip address 192.168.80.8 255.255.255.0led
00:00:38 : %S
Inestarted -- 1 ip access-group
Senat outside ip
Duplex autoternetwork O
Interface FastEthernet0/1
Ip address 192.168.1.1 255.255.255.0
Senat inside ip
Duplex auto
Speed auto
!
Netmask 255.255.255.0 ip Senat pool E.coli 192.168.80.80 192.168.80.83
Senat inside source list 1 ip pool E.coli
Ip classless
Ip route 0.0.0.0 0.0.0.0 192.168.80.80
Ip http server
Ip pim bidir-enable
!
!
1 permit any access-list
!
Line con 0
Line aux 0
Line vty 0 4
!
!
End
The results or not
Read allocation, and I do not understand! ! ! Ha Ha Ha! Isp distribution address? Thank you, I engage in conversation, but we have to study the static VPN and NAT, because a server, hoping for any kind of brothers [ Closed window ]