I want to start sequence into 0x2102 I use the numerical change configure 0x2102 But how are 0x3922
Only thing to ask is how
Tftp Lane there, I want to test into the router configuration file is always time out but Lane
I cried for you, help me, help ~~~~~~~~~~~~~~~~~~
GZAM2621R#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-J1S3-M), Version 12.2 (15) T8, RELEASE SOFTWARE (
C2)
TAC Support : http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled by pwade Wed 05:48 10-Sep-03
Image text-base : 0x80008098, data-0x819534E4 :
ROM : System Bootstrap, Version 12.2 (7r) [cmong 7r], RELEASE SOFTWARE (fc1)
GZAM2621R uptime is 14 hours, 30 minutes
System returned to ROM by power-on
Running default software
Creating 2621XM (MPC860P) processor (revision 0x100) with 60416K/5120K bytes of me
The cultivation.
Processor board ID JAE0734143P (1996376799)
M860 processor : part number 5, mask 2
Channelized E1, Version 1.0.
Bridging software.
X.25 software, Version 3.0.0.
TN3270 Emulation software.
Primary Rate ISDN software, Version 1.1.
2 FastEthernet/IEEE 802.3 interface (s)
1 Serial network interface (s)
1 Channelized E1/PRI port (s)
4 Voice FXS interface (s)
32K bytes of memory non-volatile configuration.
32768K bytes of processor board System flash (Read)
Configuration register is 0x3922
Algorithm seems to be the problem. I changed the time of 115,200 heavy-ios I entirety of the system now, I can change it in the direct path for a bargain is not diverted into console port (by Notebook
Too much trouble), then ask if the order was changed Telnet into any of the above-thank Brother, Oh
Confregist 0X2102 configure model seems to be in the order you? See, do not remember! Line con 0 Speed 9600