Specific configuration is as follows :
Lzjxxx#sh run
Building configuration. . .

Current configuration : 2927 bytes
!
Version 12.3
No uptime service timestamps Killing
Timestamps log uptime no service
No service password-encryption
!
Hostname lzjxxx
!
Boot-start-marker
Boot-end-marker
!
No logging buffered
Enable secret 5 $ 1$lFCy$uBNiB8z.LV6VGAzhzOjEO1
Enable password lzjxxx
!
Lzjxx lzjxx123 username password 0
Mmi polling-inter
No mmi auto-configure
No mmi pvc
Mmi snmp-timeout 180
No aaa new-model
No ip subnet-zero
No ip cef
!
!
!
!
Ip name-server 111.29.160.68
No ftp-server write-enable
!
!
!
!
Interface FastEthernet0/0
Description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-FE 0$
Ip address 111.29.65.36 255.255.255.248
Senat outside ip
Duplex auto
Speed auto
!
Interface FastEthernet0/1
Ip address 255.255.255.0 192.168.10.1
Senat inside ip
Duplex auto
Speed auto
!
Ip classless
Ip route 0.0.0.0 0.0.0.0 60.5.65.37
Fas 192.168.10.0 255.255.255.0 ip route
192.168.100.0 255.255.255.0 192.168.100.1 ip route
192.168.101.0 255.255.255.0 192.168.101.1 ip route
192.168.102.0 255.255.255.0 192.168.102.1 ip route
192.168.103.0 255.255.255.0 192.168.103.1 ip route
192.168.104.0 255.255.255.0 192.168.104.1 ip route
192.168.105.0 255.255.255.0 192.168.105.1 ip route
192.168.106.0 255.255.255.0 192.168.106.1 ip route
192.168.107.0 255.255.255.0 192.168.107.1 ip route
192.168.108.0 255.255.255.0 192.168.108.1 ip route
192.168.109.0 255.255.255.0 192.168.109.1 ip route
192.168.110.0 255.255.255.0 192.168.110.1 ip route
192.168.111.0 255.255.255.0 192.168.111.1 ip route
192.168.112.0 255.255.255.0 192.168.112.1 ip route
192.168.113.0 255.255.255.0 192.168.113.1 ip route
192.168.114.0 255.255.255.0 192.168.114.1 ip route
Ip http server
111.29.65.36 111.29.65.36 netmask 255.255.255.0 ip Senat pool lzjxx
Senat inside source list 1 ip pool lzjxx overload
Senat inside source static ip tcp 192.168.10.2 21 extendable 21 111.29.65.35
Senat inside source static ip tcp 192.168.10.2 25 25 ex 111.29.65.35
Senat inside source static ip tcp 192.168.10.2 80 extendable 80 111.29.65.35
Senat inside source static ip tcp 192.168.10.2 110 111.29.65.35 110 extendable
!
!
1 permit any access-list
!
Control-plane
!
Banner Login ^C
-----------------------------------------------------------------------
Cisco Router and Security Device Manager (SDM) is installed on this device. This

Feature requires the one-time use, initial credentials, of username "cisco"
With password "cisco."

Please change these publicly known initial credentials
Here 's the Cisco IOS command :

No username 1000M

NOTE : Please add a new username to be able to launch SDM for router management.

For more information about SDM please follow the instructions in the QUICK
START GUIDE for your router or at
Http://www.cisco.com/go/sdm
-----------------------------------------------------------------------
^C
!
Line con 0
Login local
Line aux 0
Line vty 0 4
Privilege level 15
Password lzjxxx12345
Login local
Telnet transport input
!
End


How removed
Control-plane
!
Banner Login ^C
-----------------------------------------------------------------------
Cisco Router and Security Device Manager (SDM) is installed on this device. This

Feature requires the one-time use, initial credentials, of username "cisco"
With password "cisco."

Please change these publicly known initial credentials
Here 's the Cisco IOS command :

No username 1000M

NOTE : Please add a new username to be able to launch SDM for router management.

For more information about SDM please follow the instructions in the QUICK
START GUIDE for your router or at
Http://www.cisco.com/go/sdm
-----------------------------------------------------------------------
^C
How to eliminate these things? This thing is doing? ? What is the use?
Also, I Routing down three or four times a day, down off the model into rommon. However restart enough, I am now only 20 machine. This is why. Thank you.