Linux -Blue forest free software | Return to home page | Site Map | Search WWW | Contact Us |
Your current position : Homepage > Free Software > Technological exchanges >Network Communication


    

Blue Forest http://www.lslnet.com at 13:28 on July 26, 2006

2950 switchboard trunk, to who gets advice ah?


Not the entire cisco switches, I do want to 1-23 port into 1-23vlan,24 trunk. Belong to download, according to the "Concise 2950 switch configuration maintenance manuals" distribution method, but without success. Only 24 vlan1 I can, not a vlan other links. Who can give instructions about ah?

Switch#show version
IOS (tm) C2950 Software (C2950-C3H2S-M), Version 12.0 (5.3) WC (1), INT MAINTENANCE
ERIM SOFTWARE
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled by devgoyal Mon 07:56 30-Apr-01
Image text-base : 0x80010000, data-0x8031A000 :

Bootstrap program is CALHOUN ROM boot loader :

Switch uptime is 17 hours, 52 minutes
System returned to ROM by power-on
System image file is "flash:c2950-c3h2s-mz.120-5.3.WC.1.bin"



Creating WS-C2950-24 (RC32300) processor (revision B0) with 22260K bytes of memory.

Processor board ID FOC0550Y1JZ
Last reset from system-reset

Processor is running Enterprise Edition Software
Cluster command switch capable
Cluster member switch capable
24 FastEthernet/IEEE 802.3 interface (s)

32K bytes of memory flash-simulated non-volatile configuration.
Base ethernet MAC Address : 00:08:21:D0:28:80
Motherboard assembly number : 73-5781-08
Power supply part number : 34-0965-01
Motherboard serial number : FOC055002LE
Power supply serial number : PHI05460B5A
Model revision number : B0
Motherboard revision number : B0
Model number : WS-C2950-24
System serial number : FOC0550Y1JZ
Configuration register is 0xF

Switch#show run
Current configuration :
!
Version 12.0
No service PADE
Killing uptime service timestamps
Service timestamps log uptime
No service password-encryption
!
Hostname Switch
!
!
!
!
!
!
!
Ip subnet-zero
!
!
!
Interface FastEthernet0/1
!
Interface FastEthernet0/2
Switchport access vlan 2
!
Interface FastEthernet0/3
Switchport access vlan 3
!
Interface FastEthernet0/4
Switchport access vlan 4
!
Interface FastEthernet0/5
Switchport access vlan 5
!
Interface FastEthernet0/6
Switchport access vlan 6
!
Interface FastEthernet0/7
Switchport access vlan 7
!
Interface FastEthernet0/8
Switchport access vlan 8
!
Interface FastEthernet0/9
Switchport access vlan 9
!
Interface FastEthernet0/10
Switchport access vlan 10
!
Interface FastEthernet0/11
Switchport access vlan 11
!
Interface FastEthernet0/12
Switchport access vlan 12
!
Interface FastEthernet0/13
Switchport access vlan 13
!
Interface FastEthernet0/14
Switchport access vlan 14
!
Interface FastEthernet0/15
Switchport access vlan 15
!
Interface FastEthernet0/16
Switchport access vlan 16
!
Interface FastEthernet0/17
Switchport access vlan 17
!
Interface FastEthernet0/18
Switchport access vlan 18
!
Interface FastEthernet0/19
Switchport access vlan 19
!
Interface FastEthernet0/20
Switchport access vlan 20
!
Interface FastEthernet0/21
Switchport access vlan 21
!
Interface FastEthernet0/22
Switchport access vlan 22
!
Interface FastEthernet0/23
Switchport access vlan 23
!
Interface FastEthernet0/24
Switchport mode trunk
!
Interface VLAN1
No ip directed-broadcast
No ip route-cache
!
Interface VLAN2
No ip directed-broadcast
No ip route-cache
Shutdown
!
Interface VLAN3
No ip directed-broadcast
No ip route-cache
Shutdown
!
Interface VLAN4
No ip directed-broadcast
No ip route-cache
Shutdown
!
!
Line con 0
Transport input none
Stopbits 1
Line vty 5 15
!
End



Switch#show vlan
LAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa0/1
2 VLAN0002 active Fa0/2
3 VLAN0003 active Fa0/3
4 VLAN0004 active Fa0/4
5 VLAN0005 active Fa0/5
6 VLAN0006 active Fa0/6
7 VLAN0007 active Fa0/7
8 VLAN0008 active Fa0/8
9 VLAN0009 active Fa0/9
10 VLAN0010 active Fa0/10
11 VLAN0011 active Fa0/11
12 VLAN0012 active Fa0/12
13 VLAN0013 active Fa0/13
14 VLAN0014 active Fa0/14
15 VLAN0015 active Fa0/15
16 VLAN0016 active Fa0/16
17 VLAN0017 active Fa0/17
18 VLAN0018 active Fa0/18
19 VLAN0019 active Fa0/19
20 VLAN0020 active Fa0/20
21 VLAN0021 active Fa0/21
22 VLAN0022 active Fa0/22
23 VLAN0023 active Fa0/23
1002 fddi-default active
1003 token-ring-default active
1004 fddinet-default active
1005 trnet-default active

VLAN Type Mr. SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1 enet 100001 1500-- - --1002 1003
2 enet 100002 1500-- - --0 0
3 enet 100003 1500-- - --0 0
4 enet 100004 1500-- - --0 0
5 enet 100005 1500-- - --0 0
6 enet 100006 1500-- - --0 0
7 enet 100007 1500-- - --0 0
8 enet 100008 1500-- - --0 0
9 enet 100009 1500-- - --0 0
10 enet 100010 1500-- - --0 0
11 enet 100011 1500-- - --0 0
12 enet 100012 1500-- - --0 0
13 enet 100013 1500-- - --0 0
14 enet 100014 1500-- - --0 0
15 enet 100015 1500-- - --0 0
16 enet 100016 1500-- - --0 0
17 enet 100017 1500-- - --0 0
18 enet 100018 1500-- - --0 0
19 enet 100019 1500-- - --0 0
20 enet 100020 1500-- - --0 0
21 enet 100021 1500-- - --0 0
22 enet 100022 1500-- - --0 0
23 enet 100023 1500-- - --0 0
1002 fddi 101002 1500-- - --1 1003
Tr 1003 101003 1500 1005 0-- srb 1 1002
1004 fdnet 101004 1500--1 ibm-0 0
1005 trnet 101005 1500--1 ibm-0 0

Two switches in the trunk

There are two types of packaging trunk, you can see that both sides are the same across the packaging would have no effect

Second place is very grateful that it was not installed correctly to the end.

TRUNK working in a switch, a switch can be different VLAN configuration, as long as there is a port on the worst TRUNK. However, the setup is different VLAN TRUNK

Visit only two layers switchboard equipment visits must have a three-tier VLAN routing equipment down. You have to put the port routing TRUNK got a good set up.

晕~ upstairs, trunk and three-layer routing Any relationship.
Trunk is used for transmission of information and vtp vlan information.
Layer 2 switches have two distribution vlan10, if these two vlan10 communication link between the two switches will be configured adapter trunk mouth. I will go out of the trunk because the data packet encapsulation dot1q or ISL. Reached so that a packet switches is another switch can take months to identify the vlan.
There is a machine that can work in the trunk, I Can two switches on the side dubbed trunk even while dubbed access, the two sides can vlan communication? ? ! !

Switchport trunk allowed vlan all


 Privacy Policy  Copyright © 1999-2000 LSLNET.COM. All rights reserved. Blue Forest website owners. E-mail : Webmaster@lslnet.com