FREEBSD the KDE desktop problems I just installed FREEBSD [size=18][color=blue] began installing the KDE desktop, but with ROOT landing, kdm imported into KDE GUI [/color][/size] order, but the following advice : Aug 12 08:13:06 kdm[50]:server /usr/X11R6/BIN/X can not be executed Unexpectedly died Aug 12 12 08:13:21 KDM[500]:SERVER #Aug 12 08:13:36 DKM[500]:Server for diskplay:0 can 't be started session disabled FREEBSD the KDE desktop problems I have not used KDE desktop, and then install the GNOME desktop, I did not expect that after landing with ROOT, gdm input, the system can enter or GNOME interface, the system also suggest that suggested as follows : Aug 12 : 08:17:09 gdm[567]:gdm_config_parse con 't find the gdm user (gdm) aborting!!!!!     Gdm_config_parse:can 't find the gdm user (gdm) aborting!!!! [color=red][size=18] FREEBSD5.2.1 system to make access to KDE or GNOME interface, so how should [/size]?[/color] Please enlighten me, I would like to thank !!!!!!!!!!!!!!!!!!>;>;>;>;>;>;>;>;>;>;>;>;>;>;>;>; FREEBSD the KDE desktop problems Try startx. . . . . . Or you do not want to use startx? FREEBSD the KDE desktop problems [quote][i] Note from the original "coopci" [/i] released : Try startx. . . . . . Or you do not want to use startx? [/quote] Startx what is the use? FREEBSD the KDE desktop problems Startx is a "325" Lane knock startx at the command line, if the case could have been better allocated into your acquiescence X (ie gnome or KDE) Recommend that you use virtual machine learning FreeBSD FREEBSD the KDE desktop problems I too have been installed virtual machine, but the speed is too slow, not used Startx at the command line is imported, Tips are : Command not found FREEBSD the KDE desktop problems X your equipment? FREEBSD the KDE desktop problems [quote][i] Note from the original "coopci" X] you loaded? [/quote [/i] Released : What X?[/size] [size=24] FREEBSD the KDE desktop problems Cd /stand . /sysinstall Configure election. . . . X severity re-election gnome and other X11 If you were first installed on the entire electoral bars. After installation, restart (reboot) After Input startx at the command line On the FREEBSD the KDE desktop problems [quote][i] Note from the original "plumlee" [/i] released : Cd /stand . /sysinstall Configure election. . . . X severity re-election gnome and other X11 If you were first installed on the entire electoral bars. After installation, restart (reboot) After Input startx at the command line On the [/quote] I used sysinstall-----configure------xfree86 [color=blue][size=24] after entering into an option price of any mistake has indicated below : You chose the xfree86 setup utility !please dose not appear to be installed before attempting to install this configure xfree86 How can this be done? [/size][/color] FREEBSD the KDE desktop problems Boss, you too spirits. You have to install XFree86 down! If you do not loaded, how to use you? I was too PF you! FREEBSD the KDE desktop problems [quote][i] Original note from the "bluebell" [/i] released : Boss, you too spirits. You have to install XFree86 down! If you do not loaded, how to use you? I was too PF you! [/quote] But why not be among [color=red][size=18] installed XFree86, please enlighten me. Grateful !!!!!!!!!!!!!!!!!!!!!!!![/size][/color] FREEBSD the KDE desktop problems Sysinstall Configure Packages If you are elected, you then install the Media Kishimoto arrow on the transport up to see X11 election X11 Then you see the whole election, or you want to use the last election The election must take XFree (accustomed to calling X) FREEBSD the KDE desktop problems Do not use under the BSD advised X, the "good life" is yet to come? It seriously! Used SERVER I have no intention of the X installed. Not stand! Speaking after but there are also many problems. FREEBSD the KDE desktop problems [quote][i] Note from the original "coopci" [/i] released : Sysinstall Configure Packages If you are elected, you then install the Media Kishimoto arrow on the transport up to see X11 election X11 Then you see the whole election, or you want to use the last election The election must take XFree (accustomed to calling X) [/quote] By the way you have done, to SYSINSTALL----CONFIGURE----XFREE86---XF86CFG Enter, click OK, the screen shows "[color=blue]-frequency protection 90K 60HZ[/color]" This how? FREEBSD the KDE desktop problems Affirming my machine configuration : C1.7G 256M DDR333 Integrated Display : Intel 845GE Display : TCL 706 17 'flat screen Integrated Display heard is much harder than independence chip? FREEBSD the KDE desktop problems You must configure you X device, such as Monitor, Video Card, Keyboard and Mouse. FREEBSD the KDE desktop problems Your FreeBSD is? 5.2.1Release? FREEBSD the KDE desktop problems [quote][i] Note from the original "nizvoo" ]you you must configure X device, such as Monitor, Video Card, Keyboard and Mouse.[/quote [/i] released : I was using the FREEBSD5.2.1 How allocation? I can not XF86CFG Lane configuration, entered on the display screen shows the super - FREEBSD the KDE desktop problems First installed xfree86, then orders Then #xf86config #cd #echo "Exec gnome-session" ".xinitrc #startx [ Closed window ]