[Dial-up questions help ]adsl No show : available now dial the tunnel devices found (No such file or directory) I ppp.conf Default : Log Phase tun command set Ident user-ppp VERSION (built COMPILATIONDATE) # Ensure that the "device" references the correct serial port # For your modem. (Cuaa0 = COM1, COM2 cuaa1 =) # Set device PPPoE:lnc0 Set speed 115200 Set dial "ABORT ABORT BUSY Signal NO\\sCARRIER TIMEOUT 5 \ \ "\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT " Set timeout 180 # 3 minute idle timer (the default) [# Dns enable DNS request (for resolv.conf) PPPoE : # #, 1976 the next three lines and replace the items in caps with # The values which have been assigned by your ISP. # Set phone PHONE_NUM Set authname #### Set authkey ****** Set ifaddr 10.0.0.1/0 10.0.0.2/0 Add default HISADDR # Add a (sticky) default route I ifconfig Lnc0 : flags=8843<UP, BROADCAST, RUNNING, SIMPLE, MULTICAST>; mtu 1500 Inet 192.168.0.3 netmask 0xffffff00 broadcast 192.168.0.255 Inet6 fe80 : : 20c:29ff:fe2c:c5c6%lnc0 prefixlen 64 scopeid 0x1 Ether 00:0c:29:2c:c5:c6 Lp0 : flags=8810<POINTOPOINT, SIMPLE, MULTICAST>; mtu 1500 Lo0 : flags=8049<UP, LOOPBACK, RUNNING, MULTICAST>; mtu 16384 Inet6 : : 1 prefixlen 128 Inet6 fe80 : : 1%lo0 prefixlen 64 scopeid 0x3 Inet 127.0.0.1 netmask 0xff000000 Ppp0 : flags=8010<POINTOPOINT, MULTICAST>; mtu 1500 Sl0 : flags=c010<POINTOPOINT, LINK2, MULTICAST>; mtu 552 Faith0 : flags=8002<BROADCAST, MULTICAST>; mtu 1500 Tun0 : flags=8051<UP, POINTOPOINT, RUNNING, MULTICAST>; mtu 1500 Inet 10.0.0.1 -->; 10.0.0.2 netmask 0xffffffff Opened by PID 179 Tun1 : flags=8051<UP, POINTOPOINT, RUNNING, MULTICAST>; mtu 1500 Opened by PID 197 Tun2 : flags=8051<UP, POINTOPOINT, RUNNING, MULTICAST>; mtu 1500 Opened by PID 199 Tun3 : flags=8051<UP, POINTOPOINT, RUNNING, MULTICAST>; mtu 1500 Opened by PID 202 [Dial-up questions help ]adsl Top [Dial-up questions help ]adsl Then I removed acquiescence Routing Route delete 0.0.0.0 Then anticipate no mistake suggested, as follows : [root@no1 /etc/ppp]$ppp -ddial PPPoE Working in ddial mode Using tun0 interface : Be unreasonable to external networks of ping-being shows no route to host, how else [Dial-up questions help ]adsl Ding [ Closed window ]