Creating ce1 Card with the success of 2600 when the non-stop after the resumption, what is the reason? Will prawn guidance on January 2. It is also not kept before distribution to resume, it should not be a distribution issues now. Power instability, you can check out any grounding. Reported the following information 00:06:28 : %DSX1-3-M32_AR_TIMEOUT 32 : Munich : Ctrl action request timeout = 0x408
30003, Channel = 0
-Process= "Serial Background" ipl= 3, 7 pid=
-Traceback= 80197EEC 8018D828 8018D9F8 8018DAB4 8001B 80195430 80195870 80195988
AE0 803E91E4
00:06:28 : %DSX1-3-M32_AR_TIMEOUT 32 : Munich : Ctrl action request timeout = 0x408
30003, Channel = 0
-Process= "Serial Background" ipl= 3, 7 pid=
-Traceback= 80195430 80195870 80195988 80198048 8018D828 8018D9F8 8018D 80196A08
AB4 8001BAE0 803E91E4
00:06:28 : %DSX1-3-NOMEMORY : Unit 4, no memory interface for Channelized.
-Process= "Serial Background" ipl= 3, 7 pid=
-Traceback= 8018D844 8018D9F8 8018DAB4 8001BAE0 803E91E4
00:06:29 : %DSX1-3-M32_AR_TIMEOUT 32 : Munich : Ctrl action request timeout = 0x408
30003, Channel 31 =
-Process= "Serial Background" ipl= 3, 7 pid=
-Traceback= 80197EEC 80195CD0 80195D78 8018E640 8018D 80195430 80195870 80195988
930 : %DSX1-3-M32_AR_TIMEOUT 8018D9F8 8018DAB4 8001BAE0 803E91E400:06:28 32 : Munich : Ctrl action request timeout = 0x408
30003, Channel = 0
-Process= "Serial Background" ipl= 3, 7 pid=
-Traceback= 80197EEC 8018D828 8018D9F8 8018DAB4 8001B 80195430 80195870 80195988
AE0 803E91E4
00:06:28 : %DSX1-3-M32_AR_TIMEOUT 32 : Munich : Ctrl action request timeout = 0x408
30003, Channel = 0
-Process= "Serial Background" ipl= 3, 7 pid=
-Traceback= 80195430 80195870 80195988 80198048 8018D828 8018D9F8 8018D 80196A08
AB4 8001BAE0 803E91E4
00:06:28 : %DSX1-3-NOMEMORY : Unit 4, no memory interface for Channelized.
-Process= "Serial Background" ipl= 3, 7 pid=
-Traceback= 8018D844 8018D9F8 8018DAB4 8001BAE0 803E91E4
00:06:29 : %DSX1-3-M32_AR_TIMEOUT 32 : Munich : Ctrl action request timeout = 0x408
30003, Channel 31 =
-Process= "Serial Background" ipl= 3, 7 pid=
-Traceback= 80197EEC 80195CD0 80195D78 8018E640 8018D 80195430 80195870 80195988
930 8018D9F8 8018DAB4 8001BAE0 803E91E4
Into surveillance mode, facie Explanation Munich 32 is not responding to an action request. Recommended Action If this message recurs, copy the error message America, you will hear as it appears on the console or in the system log. contact your Cisco technical support representative, and provide the representative with the gathered information.
Backplane bad 2600h is the last time I encountered the same problem will be allocated under CE1, slowly slipped, with particular attention to CE1 the edge of the copper grounding, several interpolation will be no more problems, I think we should contact and is caused by poor grounding [ Closed window ]