Switch#show run
Building configuration. . .

Current configuration : 4431 bytes
!
Version 12.1
No service PADE
Killing uptime service timestamps
Service timestamps log uptime
No service password-encryption
!
Hostname Switch

Ip subnet-zero
Ip routing
!
!
Spanning-tree mode pvst
Spanning-tree extend system-id
!
!
!
Interface FastEthernet0/1

!
Interface FastEthernet0/2

!
Interface FastEthernet0/3

Interface FastEthernet0/4

!
Interface FastEthernet0/5


!
Interface FastEthernet0/13
Switchport access vlan 88
Switchport mode dynamic desirable
No ip address
!interface FastEthernet0/14
Description link to bianji
No switchport
Ip address 255.255.255.0 192.168.99.1
!
Interface FastEthernet0/23
Switchport access vlan 29
Switchport mode access
No ip address
!
Interface FastEthernet0/24
Switchport access vlan 29
Switchport mode dynamic desirable
No ip address
!
Interface GigabitEthernet0/1
Switchport mode dynamic desirable
No ip address
!
Interface GigabitEthernet0/2
Switchport mode dynamic desirable
No ip address
!
Interface Vlan1
No ip address
Shutdown

!
Interface Vlan29
255.255.255.0 ip address 192.168.29.250

Interface Vlan88
255.255.255.0 ip address 192.168.88.250
!
Ip classless
Ip route 0.0.0.0 0.0.0.0 192.168.29.200
Ip http server

Access-list 103 permit ip 192.168.88.0 0.0.0.255 61.1*.1*.0 0.0.0.255
103 deny ip any any access-list
10 bb permit route-map
Match ip address 103
Set interface FastEthernet0/14
!

Login
!
End

Switch#

F0/14 green is green is 2 1 vlan29
I installed ip policy route-map bb vlan88 Why not here, but the fundamental measurement routing ineffective, please help me to see, I would like to thank go up in smoke.