Integrated NIC NFORCE2 Main Board. That is the case, I on the campus network. Dynamic ip. IP can not accept. Freebsd 4.10 NVNET installed after the driver. Boot up the NV0 can detect. But ip can not be provided, the use of heavy ipconfig,15 seconds after starting. /STAND/SYSINSTALL Using the same setup. Integrated NIC NFORCE2 successful installation of the Main Board For example, information posted. Integrated NIC NFORCE2 Main Board. 5.3 Are there similar problems? Integrated NIC NFORCE2 Main Board. 5.3 tried. You should know NFORCE2 FREEBSD 5.X support of the Main Board is not very good. Integrated NIC NFORCE2 Main Board. I tried NFORCE on the Main Board, it seems that I was using the 4.10 version, and then install the driver should download! Integrated NIC NFORCE2 Main Board. I know this, but after the installation, switched NV0 detected, but is not normal. Integrated NIC NFORCE2 Main Board. Wangchao66 brother, can you talk about the experience even ~! [ Closed window ]