IBM xSeries 365 in the SCO open server 5.0.6 installation help. I bought two of the 365 Jijiashi servers, installed 5.0.6 I imported the boot : Defbootstr link=lsil Sdsk=hd (0,2,0,0) After indicated no hard disk drive installed One way to a master who em03 : : IBM xSeries 365 in the SCO open server 5.0.6 installation help. Sdsk=hd (0,2,0,0) Why did you select two bus? Try to use Sdisk=hd (0,0,0,0) IBM xSeries 365 in the SCO open server 5.0.6 installation help. Is not feasible, try using ciss IBM xSeries 365 in the SCO open server 5.0.6 installation help. MK your hard disk is not the 73.4G? If the answer is yes, try the imported under the boot : Defbootstr link=lsil bisogeom= (8908,255,63) Then normal installation IBM xSeries 365 in the SCO open server 5.0.6 installation help. Em03 : : IBM xSeries 365 in the SCO open server 5.0.6 installation help. What is the CISS die How to use the country IBM xSeries 365 in the SCO open server 5.0.6 installation help. After the system is installed in the boot document /etc/default/ adding the first new entrants bisogeom= (8908,255,63) hard disk boot parameters, or else it will restart the systems would not suggest the size of hard disk failure. IBM xSeries 365 in the SCO open server 5.0.6 installation help. Lsil into ciss IBM xSeries 365 in the SCO open server 5.0.6 installation help. Disk how then? Or SCSI adapter is then raid卡 IBM xSeries 365 in the SCO open server 5.0.6 installation help. I accept the SCSI I, would be planted on the server : em03 yourselves : [ Closed window ]