Creating 2950 about how to amend the register value? Why is it necessary to reform As it is now register is 0xF Start each must manually guide.
C2950 Boot Loader (C2950-HBOOT-M) Version 12.1 (11r) Let EA, RELEASE SOFTWARE (fc1) Compiled by antonino Mon 17:18 22-Jul-02
WS-C2950-24 starting. . .
Base ethernet MAC Address : 00:0d:28:bf:93:40
Xmodem file system is available.
The system has been interrupted prior to initializing the
Flash filesystem. The following commands will initialize
The flash filesystem, and loading the operating launch
System software :
Flash_init
Load_helper
Boot
Switch :
0xf is normal Posted information about your show run Witch#sh run Building configuration. . .
Current configuration : 1491 bytes
!
Version 12.1
No service PADE
Killing uptime service timestamps
Service timestamps log uptime
No service password-encryption
!
Hostname Switch
!
!
Ip subnet-zero
!
Spanning-tree mode pvst
No spanning-tree optimize bpdu transmission
Spanning-tree extend system-id
!
!
Interface FastEthernet0/1
No ip address
!
Interface FastEthernet0/2
No ip address
!
Interface FastEthernet0/3
No ip address
!
Interface FastEthernet0/4
No ip address
!
Interface FastEthernet0/5
No ip address
!
Interface FastEthernet0/6
No ip address
!
Interface FastEthernet0/7
No ip address
!
Interface FastEthernet0/8
No ip address
!
Interface FastEthernet0/9
No ip address
!
Interface FastEthernet0/10
No ip address
!
Interface FastEthernet0/11
No ip address
!
Interface FastEthernet0/12
No ip address
!
Interface FastEthernet0/13
No ip address
!
Interface FastEthernet0/14
No ip address
!
Interface FastEthernet0/15
No ip address
!
Interface FastEthernet0/16
No ip address
!
Interface FastEthernet0/17
No ip address
!
Interface FastEthernet0/18
No ip address
!
Interface FastEthernet0/19
No ip address
!
Interface FastEthernet0/20
No ip address
!
Interface FastEthernet0/21
No ip address
!
Interface FastEthernet0/22
No ip address
!
Interface FastEthernet0/23
No ip address
!
Interface FastEthernet0/24
No ip address
!
Interface Vlan1
255.255.255.0 ip address 109.104.41.199
No ip route-cache
!
Ip http server
!
!
Line con 0
Line vty 0 4
Creating enable password
Login
Line vty 5 15
Login
!
End
Key issues are whether the mode? Creating 2950 Line vty 0 4
Creating password
How will enable password installed.
? ? Enable the password set up, to read : : : : : : : : : : : : ~ Gaoyuan77 Supreme also withheld true, the choice of mode is UTIL.
Although the start of the problem has been solved, but then this switch in the network, the entire network will continue, but the internal ping通 can, I do not know why?
[ Closed window ]