2950 how to restore factory installed with COMMANG : ERASE NAVRAM was OK, what would the consequences Can Erase commands Reload
N
ERASE NAVRAM, I DOMAI TEST VTP configuration in the past, are still VLAN. How to delete them die Delete flash:vlan.dat I have such a situation, I asked Cisco's agent is due to IOS version, the 2950 version has a low potential cut away, but to illustrate the point, and remember WRITE RELOAD. . Ios on the switches, and erase commands can be used to remove erase startup-config distribution, but distribution is related vlan database exception, not bugs. Manual removal of the distribution can also be used gaoyuan77 Approach.
This allocation is now generally recommend vlan database, as this configuration, the distribution of information was not preserved vlan Copy information, but directly in the (configure) under # (Configure) #vlan 10
(Config-vlan) #name test
In this way the show has run out of the allocation vlan
Initially issued by gaoyuan77 Delete flash:vlan.dat
3550 is the
29 does not seem to
DIR Color look at what you have deleted this FLASH:\VLAN.*
Erase star Reload
OK!!
2900? ERASE STARUP-CONFIG used to delete, restart on what SWITCH and the FORTRAN computational GOTO etc. OK! ! !
[ Closed window ]